Distribution Spotlight
Five-input Dual Circuit Video Switchers
The BA7626F/FS is a 5-input video signal switcher with a 6dB broadband amp developed for use in AV amp switching. Two recording/playback devices such as a DVD recorder and VCR, and three playback-only devices (i.e. DVD players and video game devices) can be connected making it easy to configure a high-performance, highly functional system.
|
More Info |
Triple Circuit Video Switchers
The BA7602F, BA7603F, BA7606F, BA7606FS, BA7607F, BA7609F and BA7627FV video signal switchers feature dual inputs with either 2 or 3 circuits. In addition to bias input and clamp input types, units integrating a pedestal clamp suitable for RGB signal switching are also available ensuring broad compatibility.
|
More Info |
DC/DC Converters | |
 | Optimized for multi-function, high performance battery-driven portable devices of all types, ROHM’s DC/DC converters and controllers (BD8301MUV/BD8303MUV) feature a wide input voltage range and automatic step-up/-down operation for reduced power consumption. High output efficiency is maintained across the entire input range. Only one coil is used and fewer parts are required than conventional Sepic systems contributing to smaller power supply configurations.
More Info High-efficiency Step-up/down
Switching Regulators with Built-in Power MOSFET (BD8301MUV) |
Video Switcher Series | |
 | Low Voltage Broadband Single Circuit Video Switchers ROHM’s lineup of 3 input/1 output (BH76332FVM/BH76333FVM) and 6 input/1 output (BH76362FV/BH76363FV) video switchers are available in either clamp or bias input. Operation is guaranteed between -40ºC and +85ºC, making them ideal for car entertainment and navigation systems.
More Info Product Lineup |
Thermostat Output Temperature Sensors
ROHM's output ICs with temperature switching function (BDExxx0G series) eliminate the need for the complicated circuitry required in conventional thermistor-type temperature detection circuits by integrating a high precision reference voltage source, comparator, constant current circuit, and temperature detection element in a single chip.
Additional features include adjustable detection temperature (3-stage: target, ±5°C), high detection accuracy (±4°C), low current consumption (16uA typ.), detection temperature hysteresis, and open drain/active low output. Fifteen models are offered in a wide range of temperatures (-20°C to +120°C, in 10°C increments) including SSOP5 package types.
Video Drivers with Built-in Low Voltage Single Circuit Video Switcher
ROHM’s lineup of 1 output/3 input (BH76330FVM/BH76331FVM) and 1 output/6 input (BH76360FV/BH76361FV) video switchers are available in either clamp or bias input. The wide operating temperature range (-40ºC to +85ºC) makes them ideal for applications requiring high reliability such as car AV and navigation systems.
|
More Info Product Lineup |
Ultra-compact PicoLED™-eco
ROHM has developed the PicoLED™-eco (SML-P11) series of ultra-compact LEDs. Patented technology results in twice the brightness as conventional products in the low current region of 1mA - all from one of the industry’s smallest, thinnest packages that are 53% and 74% smaller in area and volume, respectively, than the conventional 1608 (0603) size. Energy consumption is approximately 50% less at the same brightness, and the high reliability four-element structure (AlGaInP) prevents brightness degradation - even after long term, continuous use. These LEDs are available in red, orange, yellow, and green, and their low power consumption makes them ideal for compact portable, battery driven devices.
|
More Info |
Single Circuit Video Switchers
The BA7654F, BA7653AF/AFV, and BA7652AF video switchers integrate 2-3 inputs into a single circuit. Utilization of a high-performance feedback clamp circuit at the input terminal enables compatibility with 0.01µF ceramic capacitors for input coupling resulting in increased space savings. Features such as a high-speed switching function and a broad dynamic range ensures suitability with a wide range of applications.
4-way Tilt Sensor
ROHM offers the standard RPI-1031 optical sensor that detects movement in 90° intervals using an in-house infrared LED, 2 phototransistors and light blocking mechanism.
A novel architecture is utilized for silent operation eliminating the need for soundproofing while increasing design flexibility. In addition, optical sensors are not susceptible to vibration or magnetic fields as are mechanical and magnetic 4-way sensors respectively resulting in greater reliability.